Masks and helmets Suited for the COVID-19 (corona virus) Medical and Hospital Sector

This Kasco Respirator is NIOSH Approved

Venus1 Air Purifying Respirator good for COVID-19 (Corona Virus)

In Italy there has been a lot of these full masks with zp3 filter sold.

The main reasons are:

  1. With the shortage of disposable masks around the world. The demand is so high.
  2. This full mask gives total protection including eyes and face.
  3. As you know, Covid-19 can be transmitted by watery eyes or nose …

Important: the disinfection procedure is to use ethyl alcohol and warm water to clean the mask.

 

Technical Information

NIOSH APPROVAL: TC-84a-2024
SIZE SINGLE
FACE BLANK EPDM
HARNESS ATTACHMENT 5 POINTS
LENS POLYCARBONATE
COMPLETE RESPIRATOR WEIGHT 710 g

 

INNER MASK: The inner mask prevents the lens misting up even in extreme working conditions.

Features and Benefits for COVID-19

  • Approved according to NIOSH standards.
  • No cord, belt or breathing tube required
  • Wide view visor
  • Flip-up visor
  • Complete protection of the head, face ears and neck
  • The positive pressure helps to breathe comfortably even under strain
  • Fits most head sizes and accommodates beards and eyewear
  • Air flow distribution studied for uniform ventilation around the operator’s head
  • Battery charger with automatic controlled charge

PROTECTION AGAINST COVID-19: A negative pressure solution able to provide protection to the face, eyes and respiratory tract against particles, solid and liquid aerosols and gases.

DESIGN: Stylish and ergonomic, all the parts are designed and manufactured at our premises.

MAINTENANCE The KASCO full face masks with easily replaceable parts are easy to clean and decontaminate.

Standard Components

  • one Full Face Mask,
  • one P100 particulate filter,

FACE BLANK: The face blank and harness attachments provide an excellent face seal. An almost natural field of vision ensures optimal visibility.

THREADED CONNECTION: Full face mask with threaded connection to EN 148-1 standard combinable to the full KASCO filter range.

This Kasco Respirator is NIOSH Approved

Prof 88 Ideal for COVID-19 (Corona Virus)

This powered air-purifying helmet respirator has fan blowers, batteries and filters all built into the helmet, giving you excellent freedom of movement.

The PROF 88 can run for four hours on its batteries. The internal batteries can be charged from the NC-9 charger.

The Prof 88 respirator works by means of slight over pressure which is created inside the helmet by a flow of filtered air. Air is drawn through two filters by means of two built-in blower units powered by a rechargeable battery.

This respirator helmet is suited for use during the pandemic of COVID-19 (corona virus)

  1. With the shortage of disposable masks around the world. The demand is so high.
  2. This Prof 88 gives total protection including eyes and face.
  3. As you know, Covid-19 can be transmitted by watery eyes or nose …

 

Technical Information

NIOSH APPROVAL: TC-23C-1572
MAX AIRFLOW AT 20°C-60%RH* 230 l/min
MIN AIRFLOW AT 20°C-60%RH 210 l/min
HELMET WEIGHT 770 g
COMPLETE RESPIRATOR WEIGHT 3.9 kg
SOUND LEVEL 73 dBA
POWER 6 V
BATTERY TYPE Pb
RECHARGING TIME 8 h
RUNNING TIME >6 h
AVAILABLE SIZES Adjustable headband

Optional:

ZP3 HEPA filters for dust
SP8 12 volt power cord that plugs into a tractor’s cigarette lighter socket

 

*with battery fully charged and new chemical cartridges

Features and Benefits

  • Approved according to NIOSH standards.
  • No cord, belt or breathing tube required
  • Wide view visor
  • Flip-up visor
  • Complete protection of the head, face ears and neck
  • The positive pressure helps to breathe comfortably even under strain
  • Fits most head sizes and accommodates beards and eyewear
  • Air flow distribution studied for uniform ventilation around the operator’s head
  • Battery charger with automatic controlled charge

PROTECTION: Respirators with helmets are the only power assisted devices which can protect the head, face, eyes, ears and respiratory system against particles and gases. Inspired filtered air is sent by a blower unit through a breathing tube to the inside of the helmet creating a slight overpressure. The continuous flow of air prevents visor misting and reduces breathing strain.

COMFORT: The respirator is easy to don and use also by inexperienced workers. Lightweight and of simple design, it is comfortable to wear even in harsh working conditions.

LIFE: The use of carefully selected first choice raw materials guarantee a product average life expectancy of over ten years.

Standard Components

  • one helmet,
  • two blower units and one NiCd battery included in the helmet,
  • 110 volt BP-6 battery charger,
  • two ZP3 (HE) filters, (suited for COVID-19)
  • one airflow indicator.

AIRFLOW INDICATORS: The sphere type airflow indicator monitors the flow rate to ensure the airflow in the system is maintained so workers are protected at all times.

HELMETS: The inner headband, adjustable from 53 to 63 cm, blocks the helmet round the forehead allowing for excellent visibility when the worker turns his head. Ultraviolet sun rays are repelled by the white color of the helmet.

COLLARS: The polyamide collar closes efficiently and comfortably around the worker’s neck.