.

th_YouTube-Transparent-Logo

Click the YouTube logo to visit our YouTube Channel.

topbanner
The St. George CompanyThe St. George Company

  • Flipscreen E-80 excavator screening bucket
  • Bron B275 with Seven Mulcher
  • Skidsteer with Seven Mulcher
  • Roto Crusher  Super Mulcher
  • Seven Excavator Mulcher at York Railway
  • Full line of Kasco Respirators
  • RotoCrusher DEEP
  • Awjaw Bucket Crusher
  • Roadside Mower
Flipscreen E-80 excavator screening bucket1 Bron B275 with Seven Mulcher2 Skidsteer with Seven Mulcher3 Roto Crusher  Super Mulcher4 Seven Excavator Mulcher at York Railway5 Full line of Kasco Respirators6 RotoCrusher DEEP7 Awjaw Bucket Crusher8 Roadside Mower9
 

TTGs-Mulchers-2pg-r3-2  A Heavy-Duty Floating Hammer Mulching MowerTM

Ideal for: General Mowing with Fine Finish Orchard and Vineyard Mulching Ryegrass and Canola Mowing

ttgs-220
hammer

Massive 5 lb floating hammers with 27 mm (1-1/16") bolts, the largest in the business.

canola-fields

Well suited for mowing Canola fields.

The Seven TTGS mulching mower is able to mow grass and mulch prunings up to 5"dia.

ttgs-before
ttgs-after

FEATURES & BENEFITS OF THE TTGs MULCHERS

sidebar
centre
ttgs-4
ttgs-left
  • 1) Massive 5 lb forged special alloy steel hammer, with 27mm (1-1/16"  machined bolt with lock in place square head; “BoltopTM System” and locking nut for heavy duty use and long life. Bolt and hammer are machined for smooth swinging movement without vibration. The face of hammer blade edge features secondary ridge to extend the life of the blade if an obstruction is encountered.
  • Welded body made of DOMEX® S700 high tensile steel.
  • 2) Hydraulic linear offset system is standard equipment.
  • 3) Front plates for protection.
  • 4) Front and rear mount hitch is standard equipment. Coupling to tractor Cat. I & II.
  • Fixed side skids.
  • 5) Adjustable in height outside rear roller for adaptation to the ground.
  • 6) Removable rear rakes.
  • 7) 5 drive belts.
  • Gearbox with integrated free-wheel and input to 1000 and 540 RPM PTO is standard. (RPM is changed by reversing upper and lower belt pullies.)
  • 8) Replaceable counterblades, C01 model, to assist in mulching.
  • 9) Oversize external loading (22313)  main bearings, with 8 bolt forged bearing retainer for duability and long life.
  • Hydraulic hose connections are protected to prevent damage.
specifications

© The St. George Company Ltd.  |  Toll Free 800-461-4299  |  Phone 519-442-2046  |  Fax 519-442-7191