
	HOME \| CONTACT \| SHOWS


	MULCHERS

75 SERIES - 60 - 90 HP

SKIDMOWER^TM


	Heavy Duty Flail Hammer Mulcher Fits Most Popular Skidsteers For Grass and Brush Mowing and Land Clearing

This high speed flail hammer mower will mow everything from heavy and dense grass to standing trees up to 3” in diameter. It features fixed interior beater bars to assist with mulching of material. Four rows of hammers and 2000 RPM rotor speed ensures fast cutting.

The SKIDMOWER is attached to the skidsteer loader through a bridge link. This ensures the mower is “pulled” and not pushed, resulting in better floatation of the head and minimizing the “bulldozing” effect when the skidsteer pitches on rough ground. A front roller pusher guides material into the rotor without obstruction. The SKIDMOWER uses the same double-sided hammer as the Midiforst series mowers.

MODEL	CUTTING WIDTH	NO. OF HAMMERS	WEIGHT kg / LB
SK 175	175 cm / 69 in	18	405 kg./ 891 lb.
SK 200	200 cm / 79 in	21	435 kg./ 957 lb.

Hydraulic Drive: Equipped with hydraulic motor with a relief valve and a uni-directional valve. To achieve a rotor speed of 2000 rpm, an oil flow of between 60 litres/min. (15.85 US gal.) and 120 litres/min. (31.70 US gal.) can be used. The machine will work, but at reduced output down to 54 litres/min. (14.27 US gal.). The machine can be safely used with oil flows up to 150 litre/min. (39.62 US gal.). Pressures should not exceed 210 BAR (3000 PSI). The coupling on the return line must be a “full flow” type with back pressure limited to 1.5 BAR (21 PSI). The connection ports on the motor are 3/4” BSP female.

100 SERIES - 61 to 100 HP

MINIFORST

Capable of felling and mulching trees up to 4.8” (12cm) in diameter


	The Seppi MINIFORST is a land clearing forestry mulcher capable of felling and mulching trees up to 4.8” (12cm) in diameter, for use on tractors 48 - 90 HP. The MINIFORST has four rows of teeth with beater bars on the underside of the hood. It is available with a swinging hammer rotor allowing for fast cutting/mulching of above grade wood and branches.




	Fixed Hammers, Tungsten Tipped




		Call for Pricing

Features:

Single drive (double drive optional).
Fixed cantral 3 point linkage..
Hydraulic opening of the rear hood to control degree of mulching.

Adjustable skid height.
Fixed Tungsten Carbide Hammers
Guard Frame
Cetrifugal clutch

MODEL	WORKING WIDTH	NO. OF HAMMERS		MIN HP	MAX HP	WEIGHT
MODEL	WORKING WIDTH	SWING	FIXED	MIN HP	MAX HP	WEIGHT
MINIFORST 125	125 cm / 49 in	20	27	48	90	770 kg / 1700 lb
MINIFORST 150	150 cm / 59 in	24	30	48	90	885 kg / 1951 lb
MINIFORST 175	175 cm / 69 in	29	33	55	90	970 kg / 2140 lb
MINIFORST 200	200 cm / 79 in	33	36	68	90	1095 kg / 2410 lb

150 Series - 79 to 110 hp

MIDIFORST


	HEAVY DUTY HYDRAULICALLY DRIVEN FORESTRY MULCHER THAT CAN CUT AND MULCH TREES UP TO 8"



			Fixed Tungsten Carbide Blades



	Fast cut / mulch Cycle




	Fixed carbide hammers at 70mm wide the largest in the business. Stationary beater bars on the underside of the mulcher for superior mulching Standard Skidsteer style quick disconnect hitch Will fell and mulch trees up to 8” i diametter. Available in 3 widths: 150cm, 175cm, 200cm







	MidiForst MFSK150 (F), MFSK175 (F), MFSK299 (F) with hydraulic drive, with tree guard frame & fixed knife rotor with tungsten carbide blades

MODEL	CUTTING WIDTH cm / in	OVERALL WIDTH cm / in	NO. OF HAMMERS	MIN HP PTO	MAX HP PTO	WEIGHT KG / LB
MODEL	CUTTING WIDTH cm / in	OVERALL WIDTH cm / in	FIXED	MIN HP PTO	MAX HP PTO	WEIGHT KG / LB
MFSK100 (F)	100 / 39	179 / 71	16	55	110	780 / 1720
MFSK125 (F)	125 / 49	179 / 71	20	60	110	930 / 2050
MFSK150 (F)	150 / 59	179 / 71	24	70	110	1120 / 2468
MFSK175 (F)	175 / 69	204 / 80	28	80	110	1240 / 2733
MFSK200 (F)	200 / 79	229 / 90	32	90	110	1360 / 2997
MFSK225 (F)	225 / 89	179 / 71	36	100	110	1470 / 3240

200 Series - 100 to 175 HP

MIDIFORST DT


	Capable of felling and mulching trees up to 10” (25cm) in diameter


	The Seppi MIDIFORST DT is a land clearing forestry mulcher capable of felling and mulching trees up to 10” (25cm) in diameter, for use on tractors 100 - 142 HP. The MIDIFORST DT has four rows of teeth with beater bars on the underside of the hood. It is available with a fixed knife rotor for work above and below grade (mulching of roots and stumps)

Features:

double drive.
3 point hitch Cat. II
Double hydraulic motor drive.
Hydraulic open / close hood to control rate of mulching.

MODEL	WORKING WIDTH	NO. OF HAMMERS	MIN HP PTO	MAX HP PTO	WEIGHT
MODEL	WORKING WIDTH	FIXED	MIN HP PTO	MAX HP PTO	WEIGHT
MIDIFORST - DT 200	200 cm / 79 in	32	100	170	1499 kg / 3305 lb
MIDIFORST - DT 225	225 cm / 89 in	36	100	170	1780 kg / 3924 lb
MIDIFORST - DT 250	250 cm / 98 in	40	120	170	2000 kg / 4409 lb




		Massive forged cradles supports the carbide tipped hammers. (fixed hammer models only.)

300 Series - 150 to 400 HP

STARFORST

Capable of Mulch trees up to 16" (35 cm) in diameter

The new Seppi STARFORST mulcher is a 300 series mulcher that can handle trees up to 16" in diameter.

It features fixed tungsten carbide hammers for above grade, and 2 inch below grade mulching. Dual hydraulic motor drive with a variety of hydraulic motors available to fit most popular makes of forestry tractors.

The STARFORST features Seppi's "Rotor Forward" design with the rotor at a forward 45 degree angle for superior cutting.

The STARFORST also features three rows of forged steel internal "beater bars" and hydraulically adjustable hood for superior mulching.


	Mulches wood up to 40cm (16”) Working speed 1 - 5 km per hour Cat 3 central articulated ISO 3 point linkage 1000 RPM gearbox with freewheel Input shaft 1 3/4” Z=20 Double drive 10 belts Hydraulic rear hood Skids Front and rear protection: chains Standard rotor: fixed knives Two angle beak style carbide

MODEL	WORKING WIDTH	NO. OF HAMMERS	MIN HP	MAX HP	WEIGHT
MODEL	WORKING WIDTH	FIXED	MIN HP	MAX HP	WEIGHT
Starforst 200	200 cm / 79 in	48	150	290	2500 kg / 5510 lb
Starforst 225	225 cm / 89 in	52	230	440	2700 kg / 5950 lb
Starforst 250	250 cm / 98 in	56	250	550	3000 kg /6610 lb

400 Series - 200 to 450 HP

SUPERFORST

Capable of felling and mulching trees up to 18” (45cm) in diameter

The SUPERFORST is a large extreme-duty forestry mulcher capable of felling and mulching trees up to 18” (45cm) in diameter, for use on forestry tractors. This Mulcher has Beater Bars - 3 rows mounted on the underside of the hood for assisting with mulching. Tungsten carbide tipped fixed hammer rotor for heavy felling of standing brush and clearing of material that is already on/in the floor, slash and tops, stumps, etc.

MODEL	WORKING WIDTH	NO. OF HAMMERS FIXED	MIN HP PTO	MAX HP PTO	WEIGHT
SUPERFORST 200	200 cm / 79 in	36	150	252	3300 kg / 7280 lb
SUPERFORST 225	225 cm / 89 in	42	150	252	3600 kg / 7920 lb
SUPERFORST 250	250 cm / 98 in	45	150	252	3900 kg / 8580 lb




		Features: Double transmission belt drive. Commercial hitch mounting.




	Dual hydraulic motor drive. Hydraulic open/close hood to control rate of mulching.

SUPERFORST 250
MULCHER AND BRON 400 HXP TRACTOR


	The St. George Company has put together what we believe to be the perfect forestry mulcher / tractor combination.




		Seppi SuperForst Mulcher

		The SUPERFORST is a large extreme-duty forestry mulcher capable of felling and mulching trees up to 18” (46cm) in diameter, for use on forestry tractors (150 - 350 HP) This forestry mulcher has beater bars mounted on the underside of the hood for assisting with mulching and is available with two rotor blade configurations: Tungsten carbide tipped fixed hammer rotor for heavy felling of standing brush and clearing of material that is already on/in the floor, slash and tops, stumps, etc.

	Weight ca. 32,000 lbs (tractor only) c/w head and has a ground pressure rating of 4.0 psi




	BRON 400 Brush Tractor Designed for: Strength, Durability, Low Maintenance and Operator Comfort.

	The BRON Features: CAT C13 440 HP 6 cylinder engine D4 Berco undercarriage 32” double bar grousers pump for for mulcher 2 x 200cc pumps Pilot operated controls Fairfield Hub planetary drives Heat / air conditioning Pressurized cab Lexan windows 6 halogen lights





	Bron 400 HXP and Seppi Superforst 250





		Bron 400 HXP and Seppi Superforst 250

500 Series - 300 - 500 HP

MAXIFORST
EXTREME DUTY MULCHER

The MAXIFORST is a very large extreme-duty mulcher capable of felling and mulching trees up to 18” (45cm) in diameter, for use on forestry tractors (350 - 700 HP). This forestry mulcher has beater bars mounted on the underside of the body for assisting with mulching. Tungsten carbide tipped fixed hammer rotor for heavy felling of standing brush and clearing of material that is already on/in the floor, slash and tops, stumps, etc.. This is massive extreme-duty machine!

Features:

Double transmission belt drive.
Universal hitch mounting.
Dual hydraulic motor drive.
Hydraulic open/close hood to control rate of mulching.
2 x 250cc hydraulic motors
Largest carbide hammers in the business


	BRON 500 Mulcher Tractor Designed for: Strength, Durability, Low Maintenance and Operator Comfort.


	CAT® C15 525 HP engine D5 Salt undercarriage 28” double bar grousers Dual 130cc pumps for mulcher


	Lohman planetary drives Heat/air conditioning Pressurized cab Lexan® windows Hyd. Reversing

MODEL	WORKING WIDTH	NO. OF HAMMERS FIXED	MIN HP PTO	MAX HP PTO	WEIGHT
MAXIFORST 225	225 cm / 89 in	42	184	354	3700 kg / 8160 lb
MAXIFORST 250	250 cm / 98 in	45	184	354	4000 kg / 8820 lb
MAXIFORST 275	275 cm / 108 in	48	184	354	4250 kg / 9370 lb
MAXIFORST 300	300 cm / 118 in	51	184	354	4600 kg / 10140 lb

Forestry mulcher

forst m features self-contained 170 hp diesel power




	The Forst M is a very efficient forestry mulcher for the creation of fire-breaks, the maintenance of gas and electricity supply lines and clean up after felling operations.


	Mulches wood up to 25 cm [10 inches] in diameter. For excavators and wheeled or tracked loaders. Optional mounting plate for excavators. Deutz-motor with oil cooler: 125 kW (170 HP). Hydraulically operated rear hood to adjust the degree of mulching. Adjustable skids. Rotor with tungsten carbide fixed hammers. 225 cm cutting width. Features HY-TECH™ Rotor.

MODEL	WORKING WIDTH	NO. OF HAMMERS FIXED	WEIGHT
FORST M 225	225 cm / 89 in	45	3700 kg / 8160 lb


	© The St. George Company Ltd. \| Toll Free 800-461-4299 \| Phone 519-442-2046 \| Fax 519-442-7191


	TERMS & CONDITIONS

WARRANTY & DISCLAIMER

75 SERIES - 60 - 90 HP

SKIDMOWERTM

Heavy Duty Flail Hammer Mulcher Fits Most Popular Skidsteers For Grass and Brush Mowing and Land Clearing