![]() Place Secret Soaker “tank” in the pot before adding soil. |
![]() Cut-away showing Secret Soaker “Tank” placed in pot. |
The MPS Secret Soaker “tanks” are placed permanently in the planters or gardens and covered with the correct form of potting soil mix to ensure proper capillary action. The trees, bushes or flowers are then planted, leaving a gap of 10-15 cm (4”-6”) between the top of the “tank” and the bottom of the plant's roots. Nutrients can be fed into the water, requiring only 25% of the nutrients normally used. As the water level in the “tanks” goes down, the oxygen is drawn down to the plant’s roots.
The system only uses 20% of the water used in a surface irrigation system. Water is drawn up through the soil by capillary action. When using the links, watering need only take place about every 4 weeks indoors and every 6 weeks outdoors, but it is recommended that the systems be checked every 2 weeks. This means you can go away without having to worry about watering your garden. The MPS Secret Soaker has been in operation in Europe for over 20 years and is a proven system. It has been used by individual gardeners and even more widely by municipalities to sub-irrigate large flower gardens.
If you need help in determining what MPS Secret Soaker tank or system is needed for your planter or your garden please e-mail us or give us a call.





Tank 1, 0.9 litre (Part #1.00.00)
Tank 2, 1.9 litre (Part #1.02.00)
Tank 6, 6 litre (Part #1.06.00)
Tank 10, 10 litre
(Part #1.10.00)
Tank 4, 3.7 litre (Part #1.04.00)
|
$10.25 |
|
$14.25 |
|
$24.75 |
|
$39.50 |
|
$20.50 |





Tank 1.5, 1.4litre (Part #1.01.00)
|
$13.75 |
Half Tank 2.4 litre
(Part 1.02.40)
|
$31.50 |
Link Tank 3, 3.3 litre
(Part #1.03.00)
|
$36.25 |
|
$41.00 |
|
$29.50 |
|
|
$31.50 |
|
|
$52.00 |
|
|
Part |
Product |
Water Volume |
Planter Capacity in Litres |
|
|
1.00.00 |
MPS Tank 1 |
0.9 |
2.5-8 |
|
1.01.00 |
MPS Tank 1,5 |
1.4 |
4-12 |
|
|
1.02.00 |
MPS Tank 2 |
1.9 |
5-16 |
|
|
1.04.00 |
MPS Tank 4 |
3.7 |
30-100 |
|
|
|
1.03.00 |
MPS Tank 3 |
3.3 |
8-30 |
|
|
1.10.00 |
MPS Tank 10 |
10 |
30-100 |
|
|
1.07.00 |
MPS Link/Tank 7 |
5.9 |
20-60 |
|
|
1.24.00 |
MPS Link/Tank 24 |
17.5 |
50-250 |
|
|
1.02.40 |
Half Tank |
|
|
|
|
2.77.00 |
MPS Flexilink/Tank 77 |
|
|
|
Accessories |
Part |
Product |
Water Volume |
Usage |
|
|
9.01.00 |
Flexible pipes |
Ø:6 cm |
For connecting tanks, filler pipes, drainage and ventilation |
|
|
9.13.30 |
Filler pipe cap |
Ø:3.2 cm |
Flip-top cap for covering the filler pipe |
|
|
9.12.30 |
End-stop |
Ø:3.2 cm |
Sealing of single links. Sealing the last in a series of tanks |
|
|
9.10.30 |
Extension connecter |
Ø:3.2 cm |
Connector for flexible pipes |
|
|
9.11.30 |
T-Connector |
Ø:3.2 cm |
Connector for flexible pipes |
|
|
9.71.00 |
Air pipes |
Ø:3.2 cm |
Should be mounted at every fifth connected link |
|
9.72.00 |
Air pipes |
Ø:3.2 cm |
Should be mounted at every fifth connected link |
|
|
9.73.00 |
Air pipes |
Ø:3.2 cm |
Should be mounted at every fifth connected link |
© The St. George Company Ltd. | Toll Free 800-461-4299 | Phone 519-442-2046 | Fax 519-442-7191